Please check-- Common troubleshooting for solar tiles roof

1. solar roof tiles power generation decline

Solar tiles roof power generation decline may be due to dust, dirt, leaves, etc. covered in the solar roof tiles surface. The solution is to clean the surface of solar roof tiles regularly to keep it clean.

2. Solar roof tiles temperature is too high

The high temperature of solar tiles roof may be caused by excessive solar radiation or poor heat dissipation of solar roof tiles. The temperature can be reduced by increasing the cooling facilities of solar roof tiles, such as fans or cooling panels.

3. Solar roof tiles damage

Damage to the solar roof tiles roof can be caused by external impacts, wind and rain erosion, etc. The solar roof tiles should be inspected regularly. The integrity of solar roof tiles should be checked regularly and any damaged tiles found should be replaced promptly.

4. solar roof tiles cable failure

solar tiles roof cable failure may be due to cable wear, poor contact, etc. The solution is to check whether the cable joints and connections are normal, if any problem should be replaced in time.

5. solar roof tiles battery aging

Solar tiles roof battery aging may be due to long-term use, excessive temperature and other factors should be regularly checked solar roof tiles battery performance, if found that the battery aging is serious, should be replaced in a timely manner.

1. cleaning solar roof tiles surface

Regularly clean the surface of solar roof tiles, can use water and soft cloth for cleaning, avoid using corrosive or abrasive cleaning agent.

2. Increase cooling facilities

Adding cooling facilities on the solar tiles roof, such as fans or cooling panels, can effectively reduce the temperature of solar roof tiles and improve power generation efficiency.

3. Replace damaged tiles in time

Regularly check the integrity of the solar roof tiles, if found damaged tiles, should be replaced in time to avoid affecting the overall power generation effect.

4. Check cable connections

Regularly check the connection of the solar tiles roof cable, if you find a bad connector or cable wear, should be replaced in time to ensure the normal transmission of electricity.

5.Timely replacement of aging batteries

Regularly check the performance of solar roof tiles batteries, such as battery aging is serious, should be replaced in time to ensure the normal power generation effect of solar roof tiles.

1. Regular inspection

Regularly check the condition of solar tiles roof, find problems in a timely manner to avoid failure.

2.Attention to clean

Regular cleaning of solar roof tiles surface, keep it clean, avoid dust, dirt and other impact on power generation.

3, To prevent external impact

Strengthen the protection of solar tiles roof to prevent damage caused by external impact, such as the installation of protective nets.

4. Control temperature

Increase the heat dissipation facilities of solar roof tiles, maintain the appropriate temperature, and avoid high temperature affecting the power generation efficiency.

5. Regular battery replacement

Regularly check the performance of solar roof tiles batteries, if found aging serious, timely replacement, improve the service life of solar roof tiles.

Summarize.

Solar tiles roof common troubleshooting and preventive measures to protect the solar roof tiles of the power generation effect is important. Through regular inspection, cleaning the surface of solar roof tiles, increasing heat dissipation facilities, timely replacement of damaged tiles, checking cable connections and regular replacement of aging batteries, etc., the common failures of solar tiles roof can be effectively solved to improve the power generation efficiency and service life of solar roof tiles.