Whether you are a homeowner or a dealer, or a builder, when you consider installing solar roof tiles, you will certainly be concerned about how to replace the solar roof tiles when encountering faults, then, the next sgbsolar will show you the replacement process in detail.

Replacement Guide

1、Find the faulty piece of solar roof tiles.

2、Turn off the main switch of the photovoltaic system and disconnect the grid connection, make sure that the whole system is in a state of no electricity, disconnect the cables of the solar roof tiles.

3、 Remove the fixing nails and take off the damaged tiles.

4、Prepare a new piece of solar roof tiles, make sure it can work properly, and place it on the empty space.

5、Fix the new solar roof tiles with nails.

6、Connect the cables, restore the power switch, test whether it can operate normally.

7、Replacement is completed.

8、Focus on daily maintenance work.

Please note

1、Must be a professional installer for replacement, or contact sgbsolar in advance for technical guidance.

2、Be sure to disconnect the power switch before replacement, which is very important.

3、For your safety consideration, please do not replace in rainy days, thunder and other weather.

4、Pay regular attention to the monitoring equipment or visually inspect your PV roof so that failures can be detected in time and losses can be reduced.

5、 Record the details of the replacement operation, including the time of replacement, the reason and the specification of the new tile, to facilitate subsequent maintenance and management.

FAQ

1、Solar Roof Tile Installation Guide

2、How do I clean my solar roof?

3、How to find a faulty solar roof tile?

Contact us

Sgbsolar is the world's leading professional solar roof tiles manufacturer, integrating design, production, sales and maintenance. we have been committed to the world's energy saving and emission reduction, creating a low-carbon and environmentally friendly society.  Contact us for your solar roof tiles solution!